Strapcode issue
Hello to all fellow watch enthusiasts!
So i recently bought a Seiko 5 GMT and ordered a Strapcode Super O-Boyer shortly after that as I find the bracelet really good looking. I resized it and all, but 2 days ago I noticed that some of the screws are getting loose from just shaking my hand. Later on that day one of the screws completely fell off and I was lucky that my watch did not fell on the floor as I was sitting in my office.
So now I locked the threads with Locktite as seen in some videos, but I don’t have the same confidence in this bracelet, as I saw some photos of it tearing apart after a few months. I don’t want this to happen and am asking the question - do you have some experiences with Strapcode bracelets and what would your advice be?
Thank you all for reading!
Don't have this issue with their Jubilee, and this is good timing as I ordered the same bracelet as you for my 5KX the other day.
I'll be sure to keep an eye on the screws.
That Locktite should fix your problem. Unfortunately, you won't be able to unscrew that pin out normally afterwards. Wear it with confidence. Stay Thirsty My Friend 🍻👊🏽
Bad batch of link screws?
In general this is one of the drawbacks of screw links tbh.
Murphy's Law (just the summed version not the actual one, Google it) if it can go wrong it will.
A tiny amount of Locktite "Blue" should suffice. If you used "Red" however, I agree with @Jamair23 above.
I mean, that’s a problem you can face with screws no matter what. Contact them and let them know, but idk what (if anything) they can do about it. I’d say Loctite is your best bet. It’s easy enough to unscrew with a little heat if you ever want to put those links back or sell the watch.
I use threadlock on all my bracelet screws. It's just good practice.
A tiny amount of Locktite "Blue" should suffice. If you used "Red" however, I agree with @Jamair23 above.
Or purple loctite.
I use it on my firearms/optic mount screws. It's designed to work really well on small fasteners and stuff that might vibrate.
But blue will work too.
Yeah no red loctite!! You will need the fire wrench to get it apart. That being said, I had the same issue with the bracelet on my Islander Southold. I just made it a point to tighten them every so often and kept an eye on it. Eventually, it just had enough natural loctite, dirt and grime, to stay put. No issues since.
Or purple loctite.
I use it on my firearms/optic mount screws. It's designed to work really well on small fasteners and stuff that might vibrate.
But blue will work too.
I'll have to check out purple. 👍
That Locktite should fix your problem. Unfortunately, you won't be able to unscrew that pin out normally afterwards. Wear it with confidence. Stay Thirsty My Friend 🍻👊🏽
Recommendations like these are the reason the deamnd by many watch enthusiasts for screw-link bracelets baffles me
Bad batch of link screws?
In general this is one of the drawbacks of screw links tbh.
Murphy's Law (just the summed version not the actual one, Google it) if it can go wrong it will.
I genuinely don’t understand the attraction to screwed links. Pins just need like one tool and they never strip. I always have to figured out the right screwdriver for screwed bracelets and am worried a bracelet I like will eventually just mess up.
I genuinely don’t understand the attraction to screwed links. Pins just need like one tool and they never strip. I always have to figured out the right screwdriver for screwed bracelets and am worried a bracelet I like will eventually just mess up.
So far, out of all the watches I've handled, only two have made me go, hm, that's neat.
The first was a San Martin SN085-g. Had Hamilton frogman vibes, and the screws in the bracelet were large enough to turn with an eyeglass screwdriver, so bigger than the tiny lil things most use.
Second was/is the Sēl wavelock. Uses Allen keys and it's honestly over engineered to the Nth degree.
Don't get me wrong, I'll wear a screw link bracelet, but I always check, just to be sure.
That Locktite should fix your problem. Unfortunately, you won't be able to unscrew that pin out normally afterwards. Wear it with confidence. Stay Thirsty My Friend 🍻👊🏽
I am not planning on removing it, because I still have some positions on the micro-adjust if I want to make it larger. I think I will give it another shot and keep an eye on it. Thanks for the reply!
Recommendations like these are the reason the deamnd by many watch enthusiasts for screw-link bracelets baffles me
This wasn't a recommendation. I agree with you that collar pins are perfectly fine and never strip. In fact, I prefer collar pins myself. @nPashov stated he used Locktite and wasn't as confident in the bracelet. I'm merely stating that the Locktite should have fixed the problem and to be confident with the fix. If I were to make a true recommendation, I would have said to use a brand new screw pin and/or have Stapcode replace the whole bracket completely. Stay Thirsty My Friend 🍻👊🏽