Help!!!

Is there anyone out there who can give tips on bracelet pin removal hacks? It's driving me crazy and I'm literally on the verge of calling that 'you know what hotline' to talk me down. I mean I am literally going insane!!! I have all the tools. I perform band changes on my watches all the time because I have quite a few but this is my second time trying to remove a bracelet. The first time was also hell. Every time I give up and walk away frustrated saying the heck with it I come back thinking I'll just give it one more try. Failure!! Any tips are appreciated and please please NO lectures on drilled lugs!! I have a watch with drilled lugs so I know the difference but obviously this is what I'm working with for this one. Thx in advance.

·

Looks like you have spring bar tools to remove end links but not a pin removal tool. Get one on amazon cheap.

·

Remove the clasp from the Band on the quick adjust side. Make sure your light is best on the lH side if you are RH or opposite if you are LH. Look at both ends of the spring bars to see if one side has a ridge. If neither does, you will need to grip one end tight by pressing down hand and back. You have everything set up correct with the lugs taped. Just technique and tools. But, remove the clasp on one side, good lighting and a little more time/patience. Like riding a bike for each watch. Once you get this one, you will never forget the technique.

·
neloms

Looks like you have spring bar tools to remove end links but not a pin removal tool. Get one on amazon cheap.

I have about five or six pin removal tools but that's not what I'm trying to do. My initial interest with watches was in repair so I have everything!! I'm not trying to adjust the bracelet size as my bracelet is sized. I am literally looking for usable hacks for easy ways to remove the SPRING BAR inside those tiny little openings on the back of the solid and bracelet. The easiest should be with the pinchable spring bar removable tool but it ain't. Is there anyone that has any hacks??

·

You need a small hammer and a block as well cause those are very handy if the bracelet has the pins that push in one way a lot easier to remove them .click on link you will see whati mean about hammer and block a lot better and quicker https://ebay.us/m/5H9Tp5

·

I don't think I've been clear. I'm not trying to resize the bracelet. I am not a newbie!! I'm talking tips on removing the spring bars without tearing my watch back up!!!

Image
·
ExposedRoot

I don't think I've been clear. I'm not trying to resize the bracelet. I am not a newbie!! I'm talking tips on removing the spring bars without tearing my watch back up!!!

Image

The springbars look too long in my estimation. I would try the LH side. Pull right as hard as you can and push up from the bottom or push the case down.

·

I saw a post from Delugs on Instagram with a much easier tool to remove bracelets. Looks super cool. I don’t know the cost but makes it look so easy

·
Lumberjack77

Remove the clasp from the Band on the quick adjust side. Make sure your light is best on the lH side if you are RH or opposite if you are LH. Look at both ends of the spring bars to see if one side has a ridge. If neither does, you will need to grip one end tight by pressing down hand and back. You have everything set up correct with the lugs taped. Just technique and tools. But, remove the clasp on one side, good lighting and a little more time/patience. Like riding a bike for each watch. Once you get this one, you will never forget the technique.

I think you pointed out one of my main mistakes and that is in not removing one side and trying to do it with the bracelet attached. I'm going to go ahead and remove the quick adjust and get back to you. Thanks

·
ExposedRoot

I don't think I've been clear. I'm not trying to resize the bracelet. I am not a newbie!! I'm talking tips on removing the spring bars without tearing my watch back up!!!

Image

Looking at your picture my guess is that the tools you have are not small enough. Check out Bergeon tools as you can get a really fine point that should work, or experiment with the smallest watch making screwdriver you can find. 🙂

·

Hit it as hard as you can with a very big hammer.

·

I had a watch at the beginning that was fighting me. As important as the tip is. The extra length of the tool is crucial. It’s the best $20 you’ll ever spend. I don’t remember the last time a watch has fought me since I got this tool years ago.

Image
·

Start by removing the clasp so you can put the bracelet flat and have better access to the lugs

·
apricotbond

Looking at your picture my guess is that the tools you have are not small enough. Check out Bergeon tools as you can get a really fine point that should work, or experiment with the smallest watch making screwdriver you can find. 🙂

It is small enough. I have several of different sizes. The largest I have has the red circle and the smallest is the green circle which fits perfectly inside and absolutely does push the bars down but there's not enough clearance on both sides. Like lumberjack 77 said it's just a matter of getting one bar down enough and applying enough pressure from the back to pop at least one up. There's no way I can use a pincher and squeeze them and just pop it out. Lumberjack 77 has me on the right track It's just a matter of patience and since I've been working on it so long I've run out. Kind of one of those things where you need to walk away from it and then come back.

Image
·

All looks a bit tight but I have used this method to good effect on several occasions. But it does leave the lugs smelling a little minty!

https://www.youtube.com/watch?v=a-gllHbwhSo

·

Off topic, but what watch is this? Can we see a photo? :)

·
ExposedRoot

After spending another 20 minutes on it I concur. The spring bars are just too long. They're obviously the factory spring bars and I don't know how the heck I'm going to get them out. Once I get them out, if I ever get them out I'm definitely going to replace them with shorter bars but man I'm just mentally drained. Plus the ones that are in there now are trashed from my digging at them. I've try different forks and honestly the best ones are the ones I have that are already chiseled down from use. I have screwdrivers and though they're not bergeron I still paid about $60 for the set and I don't want to break any tips off. Thanks for your help.

It's probably either a watchmaker visit and fee or buy the Bergeon all metal springbar tool that @BDG614 has pictured. You will rarely use any other tools after this one. Plus, it gives you much better leverage and grip versus the ones you already have. The Bergeon steel fork will did into the SS pin quite nicely.

·
BDG614

I had a watch at the beginning that was fighting me. As important as the tip is. The extra length of the tool is crucial. It’s the best $20 you’ll ever spend. I don’t remember the last time a watch has fought me since I got this tool years ago.

Image

You wouldn't think it's any better than the cheapo ones that come with a bracelet/strap, but the length and weight make a huge a difference.

Also make sure you get the small tips. I'm not sure what spring bars would necessitate the big tips? Maybe an Invicta?

·

If you want to remove pins to remove links and resize a bracelet get this:

·
WatchAlot2

Hit it as hard as you can with a very big hammer.

I was close. 🤬

·

SUCCESS!! I probably took a year off my life today trying to get it but it's done. Like @Nicolo said the tolerances were just so tight. Thanks to all who chimed in and especially @Lumberjack77 who got me on the right track of removing the quick release pin because initially that was my biggest mistake. Pulling down that bar and applying pressure is the key and it can't be done with the bracelet intact. Once I had the quick release pin out I was able to wrap enough of the bracelet around the back of my wrist so that when I applied pressure to the spring bar I was also pulling the bracelet away from the case. Once the pin had enough clearance the pressure was enough to yank the end link out. I will remember that in the future like he said. Look for my wrist check tomorrow with my watch sporting a summer band along with plenty of thank you's!! 🍻🍻🎉🎉

·

Having read all the way through to the happy ending (back off you perverts), not that kind of ending, here's what i would have done to preserve my sanity.

Sold the watch......

·

I had the exact same issue with the bracelet on a Watchdives homage dive watch. Tried 3 or 4 times, each time more aggressive than before, and failed. On the 4th or 5th occasion I just resorted to extreme force and used screwdrivers in increasingly larger sizes to pry away the bracelet from the watch. I think there‘s a problem with the tolerances between watch case and bracelet endlinks on some of these Chinese watches. Or their springbars have an odd size. Anyway, I somehow got it off and took some sandpaper to the lugs and endlinks to increase the gap between them. Now it‘s still a pain in the ass though and there‘s small dents in the underside of the case and endlinks now. Honestly it‘s put me off buying more Chinese watches in the future. I hope you‘ll manage to get the bracelet off. My only advice: FORCE. But decide how bad you want to try it on a strap. If you want to keep the watch completely intact, maybe better not to take the bracelet off.

·
Colino

Having read all the way through to the happy ending (back off you perverts), not that kind of ending, here's what i would have done to preserve my sanity.

Sold the watch......

🤣🤣🤣. It was brutal. This didn't help!!!!

Image
·
doc.pls

I had the exact same issue with the bracelet on a Watchdives homage dive watch. Tried 3 or 4 times, each time more aggressive than before, and failed. On the 4th or 5th occasion I just resorted to extreme force and used screwdrivers in increasingly larger sizes to pry away the bracelet from the watch. I think there‘s a problem with the tolerances between watch case and bracelet endlinks on some of these Chinese watches. Or their springbars have an odd size. Anyway, I somehow got it off and took some sandpaper to the lugs and endlinks to increase the gap between them. Now it‘s still a pain in the ass though and there‘s small dents in the underside of the case and endlinks now. Honestly it‘s put me off buying more Chinese watches in the future. I hope you‘ll manage to get the bracelet off. My only advice: FORCE. But decide how bad you want to try it on a strap. If you want to keep the watch completely intact, maybe better not to take the bracelet off.

When I actually looked at the pins they're not any longer than my other pins and they're actually really nice and beefy. I have tons of pins but I went ahead and put those back on with the new strap because they're really good. As far as the tolerance is concerned the end link fits and sits perfectly within the lugs as you would want it to. Now that I'm over the hysteria I can appreciate just how precise the fit was. I'm actually grateful for it. Now that I'm over it I really do think it's more of a question of technique.

·
ExposedRoot

When I actually looked at the pins they're not any longer than my other pins and they're actually really nice and beefy. I have tons of pins but I went ahead and put those back on with the new strap because they're really good. As far as the tolerance is concerned the end link fits and sits perfectly within the lugs as you would want it to. Now that I'm over the hysteria I can appreciate just how precise the fit was. I'm actually grateful for it. Now that I'm over it I really do think it's more of a question of technique.

Glad it worked out 💪🏼

·

I find my Bergeon spring bar removal tool the best for these solid ends, I find if you compress one side of the bar then pull or move the end link to stop it popping back in if you know what I mean.. you have to be a bit brutal pulling or lifting the link.

I always split the bracket into two which helps you articulate it better 👍🏻

Hope this helps and keep cool bud 🙏🏻

·
ExposedRoot

It is small enough. I have several of different sizes. The largest I have has the red circle and the smallest is the green circle which fits perfectly inside and absolutely does push the bars down but there's not enough clearance on both sides. Like lumberjack 77 said it's just a matter of getting one bar down enough and applying enough pressure from the back to pop at least one up. There's no way I can use a pincher and squeeze them and just pop it out. Lumberjack 77 has me on the right track It's just a matter of patience and since I've been working on it so long I've run out. Kind of one of those things where you need to walk away from it and then come back.

Image

Those spring bar pliers are useless garbage in fact. I have the exact same ones thinking they work - But they don't. I hear and see reviews of the Swiss Bergeon pliers are WAY better. Unfortunately, it expensive roughly $100-ish 🤯😳 That's another Chinese Special AliExpress watch 😂🤣

@Lumberjack77 has it ABSOLUTELY correct. I can't believe he was able to articulate the instructions accurately and understandably in words LOL 😆 WELL DONE 🍻👊🏽

·
Jamair23

Those spring bar pliers are useless garbage in fact. I have the exact same ones thinking they work - But they don't. I hear and see reviews of the Swiss Bergeon pliers are WAY better. Unfortunately, it expensive roughly $100-ish 🤯😳 That's another Chinese Special AliExpress watch 😂🤣

@Lumberjack77 has it ABSOLUTELY correct. I can't believe he was able to articulate the instructions accurately and understandably in words LOL 😆 WELL DONE 🍻👊🏽

You should be equally impressed that I was able to follow them. 😉

·
ExposedRoot

You should be equally impressed that I was able to follow them. 😉

How did it work out? Did you get it removed?

·
Jamair23

How did it work out? Did you get it removed?

Yes. It's a long thread but I posted the success in there somewhere along with a bunch of thank you's.