π¨π¨π¨HELP!!!π¨π¨π¨
Watch case back screw head sheered off.
I nipped it up tight to get a good seal and the head came off.
There isn't enough screw body to be able to grip it and unscrew it.
If I don't correct it, the water resistance is nil.
Pic for explanation. Not my pic. The other screws are in place and I'm reluctant to fiddle in case it happens with another one.
Any bright ideas would be very welcome ππ» tia
16 comments
Sort by
Time to get a new watch
On a bigger scale I'd drill it out and retap it or helicoil. On this scale it's most likely a case replacement π’
Good luck π€πΌ
You can try to weld the remaining body to a screw, heat the case to loosen it and WD40 it out but I would only attempt it if you already have the necessary equipment
A new case is very likely the solution here
I'd try and get some purchase with some old pointed tweezers and see if I could twist the remaining thread out. Sourcing a new screw shouldn't be too hard.
That sucks, Jim! Which watch is it? I am absolutely useless with this kind of stuff, so I am no good to you!
I donβt see easy fixes unfortunately. The remaining screw is imbedded in there tight. I think anything to try to drill it out runs the risk of damaging the grooves if they arenβt damaged already.
Easy out, though I'm not sure if they make one small enough for that screw.
That sucks, Jim! Which watch is it? I am absolutely useless with this kind of stuff, so I am no good to you!
Nothing too expensive. I definitely do take backs of the more expensive stuff. I'll sort something. Tried a few of the suggestions on here this afternoon. But I have a plan....π€£
I donβt see easy fixes unfortunately. The remaining screw is imbedded in there tight. I think anything to try to drill it out runs the risk of damaging the grooves if they arenβt damaged already.
Been tinkering all afternoon Paul, and I think you're right buddy π
Nothing too expensive. I definitely do take backs of the more expensive stuff. I'll sort something. Tried a few of the suggestions on here this afternoon. But I have a plan....π€£
Sounds exciting π
Man this stinks and sorry to hear Jim.πI am glad to here it was not one of your bangers. π
Please do not fiddle with your Omegas bud!π
Man this stinks and sorry to hear Jim.πI am glad to here it was not one of your bangers. π
Please do not fiddle with your Omegas bud!π
Definitely not. That work isn't for my fat clumsy fingers!
Sounds exciting π
Or costly!! π±
Keep them fair Celtic digits crossed mate π€π»π€£
Been tinkering all afternoon Paul, and I think you're right buddy π
Wish I was wrong, though.
Could a Dremel be used to cut a small slot in the remaining snapped off bolt and then a small screwdriver used to ease it out?
Could a Dremel be used to cut a small slot in the remaining snapped off bolt and then a small screwdriver used to ease it out?
Great idea mate. Was thinking of trying that. I just need to locate a Dremel. If I have to buy one, it'll be a new case π