humblewatch

Andy
4 Followers
2 Following
11 months ago
Joined
Dallas, Texas
Follow Following Following

Recent posts

Revised NH35a Rotors

Decided to redesign the top portion of the rotor but with some variations. Please feel free to comment on which one is your favorite or any suggestion...
16

Recent Comments

commented on Revised NH35a Rotors ·

Wow that is a lot of awesome information. I'll have to read it a few times to understand and try to draw/design what your referring to so I can get a visual

commented on Revised NH35a Rotors ·

I'm assuming the heavier the rotor is towards the outside edge, the more rotation it should have (according to my broken physics model in my head lol)

commented on Revised NH35a Rotors ·
Image

One more variation. Slightly more skeletonized and a piece on the bottom triangle for (possible) weight balancing

commented on Revised NH35a Rotors ·

@OscarKlosoffWatch I actually shortened the height of the top of the bearing area as my previous design was actually off and unbalanced visually. So either way thank you for that haha. But I actually am digging this design. The only issue now relates back to another comment made about the weight of the wheel needing to be a certain amount, or in a certain area maybe? I am going to have to figure this out as it seems this design would put more weight around the bearing area possibly... of course, this is all just theory.

commented on Revised NH35a Rotors ·
Image

Was this what you were meaning @OscarKlosoffWatch ?

commented on Revised NH35a Rotors ·

I really appreciate the insight. I think I see what you mean by your design suggestion. I might actually do that and upload it here and see what you think.

commented on Revised NH35a Rotors ·

I believe so. I haven't submitted a finished design yet to see. But I'm hoping the thickness of the end of the rotor could possibly be enlargened to accommodate. If not then ill have to redesign and possibly just fill in that lower triangle and have something written on it or just filled.

More posts

Designing a Custom Rotor for the NH35A

I have been working on a custom rotor to accompany the NH35a that I will primarily be using in my custom watch builds. Nothing too fancy but I love cr...
4