cchiou

Charles Chiou

174 Posts
54 Followers
40 Following
Follow Following Following
1 day ago
Joined
Taiwan
Software Engineering

Recent posts

Restored Alba Field Gear Automatic (Seiko cal. Y621a) from the '90s

This watch belongs to a friend, for whom I'm servicing it gratis. When it arrived, the blance swung but the timegrapher showed just a snow-storm. Ther...
0 comments

Restored Alba Spire-G Automatic (Seiko Y621)

This watch belongs to a friend, for whom I'm servicing it gratis. It ran poorly with around 160 degrees of amplitude. The mainspring needed to be repl...
0 comments

Restored Titoni Airmaster Rotomatic (ladies) with ETA 2551 movement

I got this watch from auction for around USD$13. It appears that the last time it was serviced was 40+ years ago. It's been a while since I'ved last w...
3 comments

Recent Comments

commented on Restored Telux Automatic with a green TV-styled dial (Ricoh 61 movement) from the '70s Taiwan ·

They were popular in the '70s. Lots of them were made and are still in circulation.

commented on Restored Bifora 55 Lady's watch ·

The dial is flat. The ripples are probably sunlight hitting micro-scratches on the crystal. Not sure why it looks like that.

commented on cchiou's Wristcheck ·

This is a Mortima SuperDatomatic, made by a French company Cattin in the '70s. It's a mass produced pin pallet watch.

commented on Restored Telux Automatic from Taiwan made in the '70s ·

I just watch videos recorded during disassembly while reassembling.

commented on eathan21th's Wristcheck ·

Is it mineral glass? If so, you can polish it with cerium oxide.

commented on Restored Mortima Super Datomatic (Cattin 66) ·

They're easy to service, but some parts are difficult to source for replacement. However, there were a lot of them made, so sourcing a donor movement is easy on ebay.

commented on Restored Kiple (FE-233) - a French manual winding watch from '60s ·

Just scrape it off. It comes off easily.

More posts

Restored Telux Automatic with a green TV-styled dial (Ricoh 61 movement) from the '70s Taiwan

This took a couple of cycles of cleaning to get the movement running properly again. Whoever tinkered with this watch used too much incorrect oil ever...
8 comments

Restored Orient Automatic (caliber 1942) with vertical blue striped dialfrom the '70s

The watch was in a relatively good shape when I got it. It was running and just needed a good cleaning. No parts were broken nor needed replacement. T...
2 comments

Restored Orient automatic from mid-late '70s (cal. 1946) with purple dial

I got this from online auction at a very good price. It was sold as a non-runner. The gear train was stuck very stubbornly. The center-second wheel wa...
1 comment

Restored Junghans (caliber J93) manual winding watch from the '50s

I got this watch back in March and it has taken 4 months to have finally finished it. It needed a new mainspring, a new crystal, a new bracelet, and I...
1 comment

Restored Bifora Automatic (caliber 910) from 1960's Germany

This time piece came in a very rough shape. I could not open the caseback with a knife tool. It was dead stuck. This is the first time that I had to u...
2 comments

Restored Telux Automatic (Ricoh 61) from the '70s Taiwan

This was a non-runner. There was a very thick and yucky layer of rust that flew out when the caseback was opened. The automatic winding rotor bearing...
0 comments

Restored Bifora 55 Lady's watch

The German Bifora 55 caliber was manufactured during 1934- 1953. This watch arrived as a non-runner. However, all it needed was a good clean and libri...
4 comments