Tiny Movement

Taking a crack at this tiny Jean Bourquin & Cie 17-jewel pocket watch movement as a practice project. It cost me $20 and possibly my future eyesight. For scale, that’s a 35mm PRX next to it—so yes, it’s comically small.

This is only my third movement. The first two didn’t end well—both involved missing parts and some quiet soul-searching. This one? Even more delicate, and the parts are just waiting for an excuse to launch themselves into the void.

Currently running at -18s/day with a beat error that suggests it’s been through some things. Definitely overdue for a service—or a priest.

No illusions here. I expect to lose at least one screw, a spring, and possibly my will to continue. But hey, that’s half the fun.

·

Get a loupe. Seriously.

I used to work on equipment with tiny little screws and micro parts. Trying to solder a hair thin wire. You NEED magnifying lenses

·
seattlegirrlie

Get a loupe. Seriously.

I used to work on equipment with tiny little screws and micro parts. Trying to solder a hair thin wire. You NEED magnifying lenses

I have a loupe other wise this is impossible.